Hand Portable Extinguishers

ABC Multi-Purpose Stored Pressure Dry Chemical Extinguishers

Features:

  • 6 Year Warranty
  • Stored Pressure Design
  • Dependable Drawn Steel Cylinders
  • Durable High Gloss Polyester Powder Paint
  • All Metal Valve Construction
  • Temperature Range -65°F to 120°F
  • Easy and More Economical to Maintain and Service
    • Large Loop
    • Pull Pin
    • Bar Coded
    • Bi-lingual Labels
  • USCG Approved with Bracket Listed on UL Label

Specs:

ABC or Multi-Purpose extinguishers utilize a specially fluidized and siliconized mono ammonium phosphate dry chemical. It chemically insulates Class A fires by melting at approximately 350°F and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires and will not conduct electricity back to the operator.

Carbon Dioxide Stored Pressure Extinguishers

Features:

  • 5 Year Warranty
  • All Metal Valve Construction
  • Rust free aluminum cylinders
  • Durable High Gloss Polyester Powder Paint
  • Temperature Range -22°F to 120°F
  • Meets Many Hospital Medical Equipment Requirements
  • Large Loop Stainless Steel Pull Pin
  • Model 320NM, 322NM Independently Tested and Approved for use in MRI Facilities to 11.7 Tesla
  • Bar Coded and Bi-lingual Labels
  • Model 320NM, 322NM Has Sanitary White Paint Finish (easy to clean)
  • USCG Approved with Bracket Listed on UL Label

Specs:

CARBON DIOXIDE is discharged as a white cloud of “snow” which smothers a fire by eliminating oxygen. It is effective for Class B flammable liquids and is electrically non-conductive. Carbon Dioxide is a clean, non-contaminating, odorless gas.

Class D Stored Pressure Dry Powder Extinguisher

Features:

  • 6 Year Warranty
  • Stored Pressure Design
  • Dependable Drawn Steel Cylinders
  • Special corrosion resistant yellow
  • (Class D) color coded paint finish
  • All Metal Valve Construction
  • Temperature Range -40°F to 120°F
  • Unique “soft flow” extension applicator plus built in long range nozzle
  • Large Loop Stainless Steel Pull Pin
  • Bar Coded and Bi-lingual Labels

Specs:

The Amerex “soft flow” extension applicator is particularly suited for fighting Class D fires. It keeps the operator’s hands away from the extreme heat and prevents inhalation of toxic fumes caused by burning material. The easily controlled, even discharge provides a non-dispersing application of the agent. The applicator may be quickly detached to provide a straight stream of chemical where greater range, a narrow discharge pattern or a lobbing effect is required.

MODEL B570 contains a special blended Sodium Chloride based dry powder extinguishing agent. Heat from the fire causes it to cake and form a crust excluding air and dissipating heat from burning metal. Metal fires involving magnesium, sodium, potassium and sodium-potassium alloys can be successfully extinguished with this extinguisher. There is data showing that zirconium, uranium, titanium, and powdered aluminum fires can be controlled and extinguished with this unique extinguisher.

Extinguishing Capacity Available in 150 lb. Wheeled or Stationary Magnesium Chips: 4 ft2 and/or 6 lbs. of metal Sodium or Potassium Spill: 5 ft2 and/or 5 lbs.of metalSodium or Potassium Spill Depth Over 1/2”: 3 ft2 and or 6 lbs. of metal.

Sodium Potassium Alloy Spil: 3 ft2 and/or 2 lbs. of metal.

MODEL B571 contains a copper extinguishing agent specially developed by the U.S. Navy for fighting lithium and lithium alloy fires. The copper compound smothers the fire and provides an excellent heat sink for dissipating heat. Copper powder has been found to be superior to all other known fire extinguishing agents for lithium.

Extinguishing Capacity Available in 250 lb. Wheeled 4 ft 2 and/or 5 lbs. of lithium

Coast Guard Approved 2½ Gallon AFFF Foam Extinguisher

Features:

  • All Metal Valve Construction
  • Leaves no powder residue
  • Maximum visibility during discharge
  • Novice friendly, easy to understand instructions
  • Bar Coded Lables

Specs:

Model 250CG AFFF Foam Extinguisher For use on Class A (ordinary combustibles) and B (Flammable liquid) fires. Features an easy and effective application using the hose and air aspirating nozzle. Has a unique capability to apply to flammable liquid spills to prevent ignition. Provides exceptional knock down and penetrating ability for use on deep seated Class A fires. Easier clean-up when compared with traditional dry chemical agents. Painted red and is U.S.C.G. approved when mounted using the 810CG bracket. Chrome plated brass valve body with stainless steel cylinder and handles offers superior corrosion protection when compared with most aluminum or standard mild steel cylinder extinguishers. Large diameter pull pin can be easily operated with gloves on. Schraeder valve on valve body allows for remote filling and charging with compressed air or nitrogen when using the Amerex 502 charge and potable water. Meets U.S.C.G. requirements for “Type A,” “Size II” and “Type B,” “Size II” extinguishers.

Must be protected from freezing (See temperature range). Cannot be used on fires involving live electrical equipment.

Sold Exclusively Through:
Western Fire and Safety Co, Inc.
2446 NW Market St.
Seattle, WA 98107
Ph: (206) 782-7825 Fax: (206) 783- 5748
www.westernfireandsafety.com

Foam Stored Pressure Extinguishers

Features:

  • 5 Year Manufacturer’s Warranty
  • Stored Pressure Design
  • Polished Stainless Steel Cylinders
  • All Metal Valve Construction
  • Exclusive crevice free, butt welded cylinders
  • Temperature Range +40°F to 120°F
  • Leaves no powder residue
  • Maximum visibility during discharge
  • Bar Coded and Bi-lingual Labele
  • Large Loop Stainless Steel Pull Pin

Specs:

Model 254 AFFF FOAM unique 6 liter size fills many requirements for a lighter, more compact Class A:B extinguisher. Easy and effective application with the spray nozzle. Apply to Class B liquid spills to prevent ignition. Ideal for emergency first response vehicles.

Model 252 FFFP FOAM adds Class B fire fighting capability to the Class A effectiveness of this extinguisher. The Alcohol Resistant fire fighting agent is effective on fires in a wide variety of Class B materials such as alcohols, polar solvents, hydrocarbons and combinations such as gasohol. Apply to a non-ignited Class B liquid spill and it will seal the surface minimizing the chance of serious fire.

Model 250 AFFF FOAM Class A:B extinguisher. Easy and effective application with air aspirated nozzle. Apply to Class B liquid spills to prevent ignition. Ideal for emergency first response vehicles.

Halon 1211 Extinguishers

Features:

  • 1 Year Manufacturer’s Warranty
  • Stored Pressure Design
  • Dependable Drawn Steel Cylinders
  • Durable High Gloss Polyester Powder Paint
  • All Metal Valve Construction
  • Temperature Range -40°F to 120°F
  • Leaves no residue
  • Reclaimed Halon 1211 is Restored to Original Military Specification
  • Uses All Recycled Gas in Accordance With The Montreal Protocol
  • Maximum Visibility During Discharge
  • Large Loop Pull Pin
  • No Electrical Conductivity Back
  • No Thermal or Static Shock
  • Bar Coded and Bi-lingual LabelsOPTION
  • USCG Approved with Bracket Listed on UL Label
    (except model A344T)

Specs:

HALON 1211 is a liquified gas, pressurized with nitrogen, which discharges as a vapor causing no cold or static shock and no impairment of the operator’s vision. This “CLEAN” agent quickly penetrates difficult to see and hard to reach areas and leaves no residue. It is recommended for protection of delicate, sensitive and expensive computers, electrical equipment, tapes and film, automotive and aircraft engines, laboratory chemicals and equipment.

Quality industrial grade hardware, “CLEAN” agent, light weight, good discharge range and excellent fire extinguishing ability.

Halotron I "Clean Agent" Extinguishers

Features:

  • 5 Year Manufacturer’s Warranty
  • Stored Pressure Design
  • Dependable Drawn Steel Cylinders
  • Durable High Gloss Polyester Powder Paint
  • All Metal Valve Construction
  • Temperature Range -40°F to 120°F
  • EPA approved “Clean Agent” for Class A, Band C hazards
  • Low GWP (Global Warming Potential)
  • Low ODP (Ozone Depletion Potential)
  • Short Atmospheric LifetimeCLEAN
  • Leaves No Residue
  • Maximum Visibility During Discharge
  • Large Loop Pull Pin
  • No Electrical Conductivity Back to theOperator
  • No Thermal or Static Shock
  • Bar Coded and Bi-lingual Labels
  • 5 lb., 11 lb. and 15 ½ lb. Extinguishers are USCG Approved with Bracket Listed on UL Label

Specs:

Halotron™ I clean fire extinguishing agent discharges as a rapidly evaporating liquid, which is non-conductive, non-corrosive, and leaves behind no residue. Halotron™ I is the clean agent market leader with a history of successful real-world protection of valuable assets. From model scale aircraft to wide body commercial aircraft, from data centers to pharmaceutical and other industrial plants, the Halotron™ I agent has been used to extinguish the fire, limit damage and help reduce downtime that can be caused by other agents. The Halotron™ I clean agent has been determined to be the most environmentally beneficial halocarbon agent on the market today that meets wide performance standards. The primary raw material in the agent is HCFC-123, which has an outstanding profile of near-zero ozone depleting potential (0.0098, CFC-11=1.0) and a low global warming potential (77, 100 yr. CO2 time horizon). State of the art atmospheric modeling completed in 2009 describes the smaller environmental footprint than HFC-based agents available for portable extinguishers.Ideal applications for these extinguishers include: data centers, laboratories, manufacturing plants, general office areas, computer rooms, telecommunication facilities, clean rooms, control rooms, warehouses, military electronics, vehicles including classic autos, boats, engine compartments, aircraft ramps, onboard aircraft and in facilities that service aircraft and any facility where dry chemical extinguishers could cause unacceptable damage or contamination.

High Flow

Features:

  • 6 Year Warranty
  • Stored Pressure Design
  • Dependable Drawn Steel Cylinders
  • Durable High Gloss Polyester Powder Paint
  • All Metal Valve Construction
  • Twice the Flow Rate of Standard Models
  • Meets DOT Requirements
  • Temperature Range -65°F to 120°F
  • Easy and More Economical to Maintain and Service
  • Large Loop Stainless Steel Pull Pin
  • Bar Coded and Bi-lingual Labels

Specs:

HIGH FLOW portable fire extinguishers for applications where discharge rates exceeding one pound per second are required as specified in NFPA 10. These extinguishers utilize the same hard ware and are manufactured to the same U.L. specifications as Amerex compliance rated products.

High Performance Dry Chemical

Features:

  • 12 Year Warranty
  • Hot Dip Galvanized Drawn Steel Cylinders
  • High Gloss Polyester Powder Paint (Best corrosion protection available)
  • All Metal Valve Construction
  • Gauge Guards
  • Protective Rubber Foot Rings
  • Superior Range (Vertical & Horizontal)
  • High (240 PSI) Operating Pressure
  • Temperature Range -65°F to 120°F
  • ABC Multi Purpose, Regular, Purple K
  • Wide Grip Allows Clearance for Gloved Hand
  • Large Loop Stainless Steel Pull Pin
  • Bar Coded and Bi-lingual LabelsOPTION
  • USCG Approved with Bracket Listed on UL Label
  • Hot dip galvanized USCG brackets available
  • SELECT FAST FLOW FOR:
    • High Flow RateFast Discharge
    • Quicker Knockdown
    • More Operator Protection
  • SELECT COMPLIANCE FLOW FOR:
    • Long Range Highest UL Ratings

Specs:

HIGH PERFORMANCE extinguishers are the ultimate choice in fire extinguishers for high hazard, frequent use and extreme environment applications. Economical – less initial cost, lower maintenance costs and greater reliability than cartridge operated extinguishers.

Model 240 Water Extinguisher

Features:

  • 5 Year Manufacturer’s Warranty
  • Stored Pressure Design
  • Polished Stainless Steel Cylinders
  • All Metal Valve Construction
  • Exclusive crevice free, butt welded cylinders
  • Temperature Range +40°F to 120°F
  • Leaves no powder residue
  • Maximum visibility during discharge
  • Large Loop Stainless Steel Pull Pin
  • Bar Coded and Bi-lingual Labels

Specs:

Model 240 utilizes the cooling, soaking and penetrating effect of a 45-55 ft stream of water. The 55 sec. discharge time makes it very effective for inexperienced operators for use on Class A fires.

Purple K Stored Pressure Dry Chemical Extinguishers

Features:

  • 6 Year Warranty
  • Stored Pressure Design
  • Dependable Drawn Steel Cylinders
  • Durable High Gloss Polyester Powder Paint
  • All Metal Valve Construction
  • Temperature Range -65°F to 120°F
  • Easy and More Economical to Maintain and Service
  • Large Loop Pull Pin
  • Bar Coded and Bi-lingual Labels
  • USCG Approved with Bracket Listed on UL Label

Specs:

PURPLE K extinguishers contain specially fluidized and siliconized potassium bicarbonate dry chemical which is particularly effective on Class B flammable liquids and pressurized gases. It is electrically non-conductive. Purple K has been the choice of oil, gas, chemical and utilities industries as the perfered fire fighting agent.

Regular Dry Chemical Stored Pressure Sodium Bicarbonate Extinguishers

Features:

  • 6 Year Warranty
  • Stored Pressure Design
  • Dependable Drawn Steel Cylinders
  • Durable High Gloss Polyester Powder Paint
  • All Metal Valve Construction
  • Temperature Range -65°F to 120°F
  • Easy and More Economical to Maintain andService
  • Large Loop Pull Pin
  • Bar Coded and Bi-lingual Labels
  • USCG Approved with Bracket Listed on UL Label

Specs:

REGULAR extinguishers contain a siliconized sodium bicarbonate based dry chemical with free flowing and non-caking additives. Economical Class B & C protection with lower initial cost and recharging. This chemical smothers fires in flammable liquids and pressurized gases and will not conduct electricity back to the operator.

Water Mist - MRI Compatible

Features:

  • 5 Year Manufacturer’s Warranty
  • Stored Pressure Design
  • Stainless Steel Cylinders
  • Durable High Gloss Polyester Powder Paint
  • All Metal Valve Construction
  • Exclusive Crevice Free, Butt Welded Cylinder
  • Temperature Range +40°F to 120° FMRI SAFE
  • Nonmagnetic Construction Tested by an Independent
  • Agency for use in MRI Facilities to 11.7 Tesla (including wall hanger bracket)
  • Non-toxic – Causes no Respiratory Problems
  • De-ionized Water Extinguishing Agent (sold separately)
  • Sanitary White Paint Finish (easy to clean)
  • No Powder Residue
  • Wand Provides Greatest Operator Safety
  • Large Loop Stainless Steel Pull Pin
  • Maximum Visibility During Discharge
  • No Electrical Conductivity Back to the Operator
  • No Thermal or Static Shock
  • Minimal Training – Simplest to use
  • Most Economical Agent Available
  • Bar Coded and Bi-lingual Labels
  • USCG Approved with Bracket Listed on UL Label
  • Available with Polished Stainless Steel Cylinders

Specs:

WATER MIST is the ultimate extinguisher for Class A fires and where a potential Class C (electrical) hazard exists. The fine spray from the unique misting nozzle provides safety from electrical shock, greatly enhances the cooling and soaking characteristics of the agent and reduces scattering of burning materials. The Amerex Water Mist extinguishers contain de-ionized water (sold separately) making them the best extinguishers for protection of hospital environments, valuable books and documents, telecommunication facilities and “clean room” manufacturing facilities. The Amerex WaterMist extinguishers are easy to use, maintain, and service.

Wet Chemical Stored Pressure Class "K" Kitchen Extinguishers

Features:

  • 5 Year Manufacturer’s Warranty
  • Stored Pressure Design
  • Polished Stainless Steel Cylinders
  • All Stainless Steel Valve Construction
  • Exclusive Crevice Free, Butt Welded Cylinder
  • Tested on Commercial Deep Fat Fryers to ANSI / UL
  • Safe to use on Energized Electric Appliances
  • Class 2A Rated to Meet Fire Code
  • Occupancy Hazard Requirements
  • Temperature Range +40°F to 120°F
  • Factory Charged
  • Large Loop Stainless Steel Pull Pin
  • Swivel Connection on Hose Allows Nozzle to be
  • Oriented for Proper Use
  • Nozzle Grip Design with 45° Angle for Easy
  • “Overhead” Application
  • Agent Discharged as a Fine Mist Helps Prevent Grease
  • Splash and Re-flash While Cooling the Appliance
  • Precise Extinguishing Agent Application
  • Bar Coded and Bi-lingual Labels
  • USCG Approved with Bracket Listed on UL Label

Specs:

WET CHEMICAL extinguishers are the best restaurant kitchen appliance hand portable fire extinguishers you can purchase. Each model has been tested and approved for the Class K listing by UL specifically for restaurant kitchen hazards. They contain a special potassium acetate based agent. The recent trend to more efficient cooking appliances and use of vegetable based cooking oils dictates the use of a hand portable fire extinguisher with greater fire fighting capacity and cooling effect to combat these very hot and difficult fires. Available in two sizes – 6 liter or 2½ gal. – with attractive stainless steel cylinders and easy to use hose and spray application nozzle. The superior fire fighting capability of the Wet Chemical agent is placed exactly where you aim it with no chemical residue to clean up. The Models B260 and B262 are the ideal “KITCHEN USE” fire extinguishers. They supplement existing cooking equipment automatic system protection for an extra margin of safety.